vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
B-003 Diagnostic System Check > < B-001 DIAGNOSTIC TROUBLE CODE

Astra H

B-002 - DATA LIST

Test

Work Order Description

Nominal Value
T001 Tester Display Driver Airbag Stage1 Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
2.1 ... 3.9 Ohm
  • Turn steering wheel very slowly to stop in both directions.
2.1 ... 3.9 Ohm
Concerned Terminals:
25, 26 (XC17)
  
Yes: No:
T002 Tester Display Passenger Airbag Stage1 Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
1.6 ... 3.1 Ohm
Concerned Terminals:
15, 16 (XC17)
  
Yes: No:
T003 Tester Display Driver Airbag Stage2 Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
2.1 ... 3.9 Ohm
  • Turn steering wheel very slowly to stop in both directions.
2.1 ... 3.9 Ohm
Concerned Terminals:
23, 24 (XC17)
  
Yes: No:
T004 Tester Display Passenger Airbag Stage2 Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
1.6 ... 3.1 Ohm
Concerned Terminals:
17, 18 (XC17)
  
Yes: No:
T005 Tester Display Driver Side Airbag Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
1.6 ... 3.1 Ohm
Concerned Terminals:
27, 28 (XC18)
  
Yes: No:
T006 Tester Display Passenger Side Airbag Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
1.6 ... 3.1 Ohm
Concerned Terminals:
23, 24 (XC18)
  
Yes: No:
T007 Tester Display Left Rollover Bar Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
1.6 ... 3.1 Ohm
Concerned Terminals:
21, 22 (XC18)
  
Yes: No:
T008 Tester Display Right Rollover Bar Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
1.6 ... 3.1 Ohm
Concerned Terminals:
17, 18 (XC18)
  
Yes: No:
T009 Tester Display Driver Pretensioner Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
1.6 ... 3.1 Ohm
Concerned Terminals:
25, 26 (XC18)
  
Yes: No:
T010 Tester Display Passenger Pretensioner Squib Circuit Resistance
  • Ignition ON
  • Engine OFF
  • All consumers turned off
1.6 ... 3.1 Ohm
Concerned Terminals:
19, 20 (XC18)
  
Yes: No:
T011 Tester Display Driver Seatbelt Status
  • Ignition ON
  • Engine OFF
  • All consumers turned off
  • Driver seat belt not engaged
Not Buckled
  • Driver seat belt engaged

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
Buckled
Concerned Terminals:
34, 35 (XC18)
  
Yes: No:
T012 Tester Display Passenger Seatbelt Status
  • Ignition ON
  • Engine OFF
  • All consumers turned off
  • Front passenger seat belt not buckled up
Not Buckled
  • Front passenger seat belt buckled up

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
Buckled
Concerned Terminals:
36, 37 (XC18)
  
Yes: No:
T013 Tester Display Deployment Readiness Of All Passenger Airbags
  • Ignition ON
  • Engine OFF
  • All consumers turned off
  • Front passenger seat recognition sensor not actuated.
No
  • Front passenger seat recognition sensor actuated.
Yes
  • Child seat installed rearwards.
No
  • Child seat installed forwards.

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
No
Concerned Terminals:
38 (XC18)
  
Yes: No:
T014 Tester Display SOD Status (Seat Occupied Detection)
  • Ignition ON
  • Engine OFF
  • All consumers turned off
  • Front passenger seat recognition sensor not actuated.
Empty
  • Front passenger seat recognition sensor actuated.

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
Adult
Concerned Terminals:
38 (XC18)
  
Yes: No:
T015 Tester Display PPD Calibration (Passenger Presence Detection)
  • Ignition ON
  • Engine OFF
  • All consumers turned off

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
Valid
Concerned Terminals:
38 (XC18)
  
Yes: No:
T016 Tester Display PPD Sensor (Passenger Presence Detection)
  • Ignition ON
  • Engine OFF
  • All consumers turned off
  • Front passenger seat recognition sensor not actuated.
No Passenger
  • Front passenger seat recognition sensor actuated.

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
Passenger
Concerned Terminals:
38 (XC18)
  
Yes: No:
T017 Tester Display CSD Sensor (Child Seat Detection)
  • Ignition ON
  • Engine OFF
  • All consumers turned off
  • Child seat installed rearwards.
CS Rear Face
  • Child seat installed forwards.
CS Forward
  • No child seat on front passenger seat.

Note:

Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
No CS
Concerned Terminals:
38 (XC18)
  
Yes: No:





B-003 Diagnostic System Check > < B-001 DIAGNOSTIC TROUBLE CODE