|
Replace sash window guide (guide rail) - driver's
side (front door) - L08
 Remove
| 2. |
Detach front door inner panelling 
|
|
| 3. |
Partly loosen water vapour barrier
| • |
Remove 2x holding angles
|
|
|
| 4. |
Detach outer channel strip
Note: Prise off window
channel strip from inside with the appropriate tool
| • |
Unclip window channel strip from the rear window frame
bracket
|
| • |
Remove fastening clip from the outer window frames
|
|
|
|
| 6. |
Remove rear sash window guide rail
| • |
Bore out 2x blind rivets
|
|
| 7. |
Take out rear sash window guide rail
|
|
|
Install
| 8. |
Position rear sash window guide rail
|
| 9. |
Install rear sash window guide rail
| • |
Rivet on 2x blind rivets
|
|
| 10. |
Install outer channel strip
| • |
Install fastening clip on the outer window frame
|
| • |
Clip in window channel strip in the window channel bracket
|
| • |
Press the window channel strip onto the door folding
|
|
| 11. |
Fasten water vapour barrier
| • |
Install 2x holding angles
|
|
| 12. |
Attach front door inner panelling
|
|
