vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace the door's window actuation (front door) - L08 > < Replace sash window guide (guide rail) - driver's side (front door) - L08

Astra H

Replace the door's sash window guide (front door) - L08

  Remove

1.   Lower sash window
2.   Detach front door inner panelling LUREF_1.gif
Object Number: 3446458 Size: DEFAULT

3.   Partly loosen water vapour barrier
•   Remove 2x holding angles
– Remove 2x pins

4.   Detach outer channel strip
Note:   Prise off window channel strip from inside with the appropriate tool
•   Unclip window channel strip from the rear window frame bracket
•   Remove fastening clip from the outer window frames
Object Number: 3446463 Size: DEFAULT


5.   Prepare drill
Object Number: 3446456 Size: DEFAULT

6.   Remove rear sash window guide rail
•   Bore out 2x blind rivets
7.   Take out rear sash window guide rail
8.   Loosen front door sash window
Note:   Guide the sash window so in position that the fastening bolts align with the top mounting holes
•   Unscrew 2x bolt
– Unhinge window winder from its sash guide

9.   Remove front door sash window
•   Unhinge sash window from the window winder guide pieces
•   Remove sash window upwards
Note:   Drive window actuation downward and simultaneously tilt the sash window forwards! A 2nd mechanic is required to retain the sash window!
10.   Detach sash window guide
Object Number: 3446653 Size: DEFAULT


  Install

11.   Install sash window guide
12.   Install front door sash window
Note:   Gently drive window actuation upward and simultaneously tilt the sash window forwards! A 2nd mechanic is required to retain the sash window!
•   Position the sash window downwards
•   Hang sash window in window winder guide pieces
13.   Fasten front door sash window
Note:   Guide the sash window so in position that the fastening bolts align with the mounting holes!
•   Tighten 2x bolts
– Hang window winder arm in the sash window guide
14.   Position rear sash window guide rail
15.   Install rear sash window guide rail
•   Rivet on 2x blind rivets
16.   Install outer channel strip
•   Install fastening clip on the outer window frame
•   Clip in window channel strip in the window channel bracket
•   Press the window channel strip onto the door folding
17.   Fasten water vapour barrier
•   Install 2x holding angles
– Impress 2x pins
18.   Attach front door inner panelling LUREF_1.gif
19.   Close sash window

Replace the door's window actuation (front door) - L08 > < Replace sash window guide (guide rail) - driver's side (front door) - L08