vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Camshaft Position Actuator Adjuster Replacement > < Timing Belt Replacement - 1.6L LDE, LXV, 1.8L 2H0, LUW and LFH

Astra J

Timing Belt Rear Cover Replacement (1.6L LDE, LXV, 1.8L 2H0, LUW and LFH)

Removal Procedure

1. Remove the camshaft position actuator adjuster. Refer to Camshaft Position Actuator Adjuster Replacement .
2. Remove the timing belt tensioner. Refer to Timing Belt Tensioner Replacement .

           2026845



3. Remove the 4 timing belt rear cover bolts (2).

Note:  Oil can escape. Use a cloth, rag or paper to take the oil drain away from all timing components.
4. Remove the timing belt rear cover (1).

Installation Procedure

1. Clean the 4 timing belt rear cover threads.
2. Apply locking compound to the 4 NEW timing belt rear cover bolts.

           2026845




Note:  If the cover is contaminated with oil. You have to clean it close.
3. Install the timing belt rear cover (1).

Caution: Refer to Fastener Caution .
4. Install the 4 timing belt rear cover bolts (2) and tighten to 6 N·m (53 lb in) .
5. Install the timing belt tensioner. Refer to Timing Belt Tensioner Replacement .
6. Install the camshaft position actuator adjuster. Refer to Camshaft Position Actuator Adjuster Replacement .

Camshaft Position Actuator Adjuster Replacement > < Timing Belt Replacement - 1.6L LDE, LXV, 1.8L 2H0, LUW and LFH