Workshop Manuals Factory service & repair Vauxhall
01 Preface02 General Information03 Body Hardware and Trim04 Body Repair05 Body Systems06 General Vehicle Information07 Brakes08 Diagnostic Navigation09 Driveline/Axle10 Driver Information and Entertainment11 Engine12 HVAC13 Power and Signal Distribution14 Roof15 Safety and Security16 Seats17 Steering18 Suspension19 Transmission/Transaxle
Vauxhall Astra J02 · General Information
02 · General

Volatile Memory Programming (General Information)

Make
Vauxhall
Model
Astra J
Section
Specifications › Volatile Memory Programming
General InformationVolatile Memory Programming

Volatile Memory Programming

Electric Window Lifters

Move all the windows to the topmost position and hold the switch pressed down for 2 seconds.

Sliding Sunroof

Move the sliding roof to the respective end stops to recalibrate the sensors.

Initialize Steering Angle Sensor (Vehicles without ESP and with Electric Power Steering)

Warning: For vehicles with electric power steering (EPS) and without a vehicle stability enhancement program, the steering angle sensor MUST always be initialized after the battery has been disconnected. Failure to initialize the steering angle sensor could limit the operation of the EPS system and result in personal injury. To ensure proper initialization of the EPS system, do the following:
    •  The engine should be on with the vehicle stationary.
    •  Turn the steering wheel counterclockwise until it stops.
    •  Turn the steering wheel clockwise until it stops.

Parts & tools for this job For Vauxhall Astra

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.