Workshop Manuals Factory service & repair Vauxhall
Vauxhall Astra J18 · Suspension
18 · Steering & suspension

DTC C0569

Make
Vauxhall
Model
Astra J
Section
Tire Pressure Monitoring › Other Information › DTC C0569
SuspensionDTC C0569

DTC C0569

Diagnostic Instructions

•  Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
•  Review Strategy Based Diagnosis for an overview of the diagnostic approach.
•  Diagnostic Procedure Instructions provides an overview of each diagnostic category.

DTC Descriptor

DTC C0569 00: System Configuration Malfunction

Circuit/System Description

If the tire type and pressure information is not entered with the scan tool during the body control module (BCM) setup, the tire pressure monitor system indicator icon on the instrument cluster will flash for 1 min. and then remain illuminated after the ignition switch is cycled ON and the instrument cluster bulb check is complete. If equipped, the driver information center will also display a service tire monitor type message. Under these circumstances, DTC C0569 will be set and the tire type and pressure information will need to be entered for the system to function correctly.

Conditions for Running the DTC

Ignition ON.

Conditions for Setting the DTC

The tire type and pressure information is not entered into the BCM during programming and setup.

Action Taken When the DTC Sets

•  The tire pressure monitor system indicator icon on the instrument cluster flashes for 1 min. and then remains illuminated after the ignition switch is cycled ON and the instrument cluster bulb check is complete.
•  If equipped, the driver information center displays a service tire monitor type message.

Conditions for Clearing the DTC

A current DTC will clear when the BCM has undergone the tire type and pressure selection setup procedure and 1 ignition cycle has occurred.

Diagnostic Aids

A newly replaced BCM will set DTC C0569 after programming on its initial ignition ON cycle if the module setup information has not been entered.

Reference Information


Schematic Reference

Tire Pressure Monitoring System Schematics


Connector End View Reference

Component Connector End Views


Description and Operation

Tire Pressure Monitor Description and Operation


Electrical Information Reference


Scan Tool Reference

Control Module References for scan tool information

Circuit/System Verification

1. Ignition ON.
2. Enter the Tire Type and Pressure information with a scan tool into the K9 body control module. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label .
3. Ignition OFF then ignition ON.
4. Verify DTC C0569 is not set.
    ⇒  If the DTC is set

Replace the K9 body control module.     ⇓  If the DTC is not set.

5. All OK.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

Control Module References for BCM replacement, programming, and setup.

Parts & tools for this job For Vauxhall Astra

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.