Front Valve Body, Dismantle and Assemble (AF
13-II)
Note: The valve body
should only be disassembled for cleaning purposes as the individual
parts are not available from suppliers. Thus extreme care should be
exercised when performing this work.
Remove
|
3. |
Remove modulator valve B1
• |
Consisting of modulator piston (1) with spring (2), plug (4)
and wedge (3)
|
|
4. |
Remove neutral control valve.
• |
Consisting of piston (8) with spring (7), plug (6) and wedge
(5)
|
|
|
Install
|
5. |
Insert all neutral control components
• |
Consisting of piston (8) with spring (7), plug (6) and wedge
(5)
|
|
6. |
Insert modulator valve B1
• |
Consisting of modulator piston (1) with spring (2), plug (4)
and wedge (3)
|
|
|
|