Workshop Manuals Factory service & repair Vauxhall
Vauxhall Nova12 · Steering
12 · Steering & suspension

Steering, Position Straight Ahead (Steering Gear)

Make
Vauxhall
Model
Nova
Section
Steering Gear › Repair Instructions › Steering, Position Straight Ahead
SteeringSteering, Position Straight Ahead

 

 

Steering, Position Straight Ahead

 

After all necessary operations on the steering gear or steering column assembly are completed (removing and reinstalling, or disassembling and reassembling), the exact straight ahead driving position of the steering is to be checked in each case.

 

The straight ahead driving position is attained if the reference dimension

I = 420 - 1/ + 2 m m/ 16.8 - 0.04/ + 0.08 in.

 

 

Object Number: 2384780 Size: DEFAULT

 

 

Check this by placing Inspection Gauge KM-551 (420 mm/16.54 in.) between right shoulder of bellows seat and left mounting shoulder of steering gear housing (seen in driving direction).

 

Hold steering wheel in this straight ahead position.

(In illustration D 4271 the air cleaner is removed).

 

 

Object Number: 2382155 Size: DEFAULT

 

 

The following conditions must be fulfilled:

 

1.    The clamp flange bolt for steering spindle must be lying horizontally on top.

 

2.   The steering wheel must be centred on the steering spindle (steering wheel spokes are centred diagonally and pointing downward).

 

Regarding Condition 1.          If the clamp bolt is slanted - e.g. pinion is displaced one cog on the rack (installation mistake) - the steering pinion position must be corrected immediately.

 

Regarding Conditon 2.           If steering wheel is off centre more than + 5 ° (clamp flange bolt must be lying horizontally and on top) remove steering wheel from steering spindle with KM-210-A and centre on the spindle splines.

 

Parts & tools for this job For Vauxhall Nova

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.