Control Unit, Remove and Install (Airbag)

Make: Vauxhall
Model: Omega B
Section: Airbag › Repair Instructions › Control Unit, Remove and Install

‹ Prev Contact Unit, Remove and Install Next › Illustration, Non Height Adjustable Steering Column Assembly, Vehicles with Airbag

Body EquipmentControl Unit, Remove and Install

Control Unit, Remove and Install

Caution

Disconnect battery and wait 1 minute until the capacitor has discharged.

Remove

Centre console – see operation "Centre Console, Remove and Install". Air duct – rear mixed air nozzle – see operation "Air Duct – Rear Mixed Air Nozzle, Remove and Install" in group "D". Wiring harness plug for control unit (2), control unit (1).

Install

Control unit (1) – tightening torque 10 Nm / 7.5 lbf. ft. Control unit wiring harness plug (2), air duct of rear air nozzle, centre console, battery.

Caution

If a new control unit is installed, it must be programmed – see "Airbag" Checking Procedures.

Related Literature Units
-
-
-
-
-
-

‹ Prev Contact Unit, Remove and Install Next › Illustration, Non Height Adjustable Steering Column Assembly, Vehicles with Airbag

Parts & tools for this job For Vauxhall Omega

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.