|
For vehicles with height adjustable steering column assembly:
Remove steering column assembly – see operation "Steering
Column Assembly, Remove and Install". For vehicles with
non-adjustable steering column assembly: Remove steering shaft
– see operation "Upper Steering Shaft, Replace"
Remove clamp bolt (1) for steering gear. Remove disc joint.
Install
Push disc joint onto steering shaft – if stiff, slightly
widen mounts on disc joint for steering shaft and steering
gear.
For vehicles with non-adjustable steering column assembly:
Install steering shaft – see operation "Upper Steering Shaft,
Replace" Carefully push steering shaft into disc joint. For
vehicles with height adjustable steering column assembly: Install
steering column assembly – see operation "Steering Column
Assembly, Remove and Install". Carefully push steering shaft into
disc joint.
Connect clamp bolts (2 and 3) – tightening torque 22 Nm /
16 lbf. ft.
|
