vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Reference Gap between Crankshaft Pulse Pick-up and Increment Disc, Check (X 16 XEL) > < Crankshaft Bearing Clearance, Check (Determine Bearing Clearance with Micrometer and Inside Micrometer)

Vectra B

 

Crankshaft Pulse Pick-up, Remove and Install (X 16 XEL)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

For X 16 XEL with secondary air system: Remove upper part of intake manifold - see operation "Intake Manifold - Upper Part, Remove and Install (X 16 XEL with Secondary Air System)". Disconnect wiring harness plug for crankshaft pulse pick-up (1) and unclip from bracket. Remove cable ties.  

For X 16 XEL without secondary air system: Disconnect wiring harness plug for crankshaft pulse pick-up (2) and unclip from alternator support bracket.  

Remove side engine compartment cover.  

Object Number: 2400325 Size: DEFAULT

 

 

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove fastening bolt (arrow) and remove crankshaft pulse pick-up (1) from crankshaft pulse pick-up bracket.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Attach crankshaft pulse pick-up to crankshaft pulse pick-up bracket - tightening torque 8 Nm / 6 lbf. ft.  

Install side engine compartment cover.  

For X 16 XEL with secondary air system: Guide crankshaft pulse pick-up cable between intake manifold ducts of 1st and 2nd cylinders. Clip wiring harness plug for crankshaft pulse pick-up into bracket and connect. Secure crankshaft pulse pick-up cable with cable tie - ensure correct cable routing. Install upper part of intake manifold - see operation "Intake Manifold - Upper Part, Remove and Install (X 16 XEL with Secondary Air System)".  

Object Number: 2400326 Size: DEFAULT

 

 

Object Number: 616192 Size: DEFAULT  Install, Connect   

For X 16 XEL without secondary air system: Connect wiring harness plug for crankshaft pulse pick-up and clip onto alternator support bracket - ensure correct cable-routing.  

Object Number: 616196 Size: DEFAULT  Inspect   

Check gap between crankshaft pulse pickup and increment disc - see operation "Gap between Crankshaft Pulse Pickup and Increment Disc, Check".  

 

 
Related Literature Units
-
-
-

Reference Gap between Crankshaft Pulse Pick-up and Increment Disc, Check (X 16 XEL) > < Crankshaft Bearing Clearance, Check (Determine Bearing Clearance with Micrometer and Inside Micrometer)