- Vectra B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- Repair Instructions
- Description and Operation
- Labour Time Allowances
- Other Information
- Technical Service Bulletins
- Technical Information
- OHC Petrol Engine
- DOHC Petrol Engine
- Diesel Engine
- Fuel Injection Systems
- Repair Instructions
- Description and Operation
- Technical Service Bulletins
- Multec (1.3l / 1.6l)
- Multec SZ
- Multec S
- Motronic M 1.5.4
- Motronic M 2.8.3
- Simtec 56/56.5
- EDC MSA 15.6
- EDC MSA 15 M
- Repair Instructions
- Intake Manifold - Upper Part, Remove and Install
- Intake Manifold - Lower Part, Remove and Install
- Fuel Injection Pump, Remove and Install reinstallation
- Charge Pressure Control Solenoid Valve, Remove and Install
- Switchover Valves Solenoid Valve, Remove and Install
- Switchover Valves Vacuum Unit, Remove and Install
- Exhaust Gas Recirculation Solenoid Valve, Remove and Install
- Accelerator Pedal - Accelerator Pedal, Remove and Install
- Description and Operation
- Specifications
- Diagnostic Information and Procedures
- Technical Service Bulletins
- Schematic and Routing Diagrams
- Fuel Injection Nozzles
- Fuel Injection Lines
- Crankshaft Pulse Pickup
- Accelerator Pedal Position Sensor
- Fuel Injection Pump
- Hot Film Mass Air Flow Meter
- Control Unit
- Charge Pressure Sensor
- Coolant Temperature Sensor
- Air Cleaner Housing
- Simtec 70
- Engine Electrics
- Cooling System
- Turbo-Charging
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories