Remove exhaust manifold - see operation "Exhaust Manifold (with Turbocharger), Remove and Install". Remove exhaust manifold (4) from turbocharger (3 fastening bolts). Remove return manifold (1) from turbocharger - 3 fastening bolts. Disconnect oil feed line (2) and oil return line (3) from turbocharger.
 Install, Connect Attach oil feed line to turbocharger with new seal rings - tightening torque 20 Nm / 15 lbf. ft. Attach oil return line with new seal to turbocharger - 8 Nm / 6 lbf. ft. Attach return manifold with new gasket to turbocharger - tightening torque 30 Nm / 22 lbf. ft. Attach exhaust manifold with new gasket to turbocharger - tightening torque 30 Nm / 22 lbf. ft. Install exhaust manifold - see operation "Exhaust Manifold (with Turbocharger), Remove and Install". | 
Remove, Disconnect 