Running gear
Power unit
2EE carburettor, TSZ-H ignition system
Self diagnosis, V.A.G Inspection Service
Mixture preparation carb.
Removing and installing carburettor and intake manifold
Repairing 2EE carburettor
Carburettor upper part
Carburettor lower part
Safety precautions
Rules for cleanliness
Checking and adjustment data
Carburettor assembly
Upper nozzle layout in carburettor upper part
Lower nozzle layout in carburettor upper part
Adjusting pipe for full-load enrichment
Idle setting
Check and adjust CO content
Ecotronic control unit J184 quick function test
Checking throttle valve positioner V60
Checking and adjusting throttle valve positioner V60 control range
Checking air flap positioner V63
Checking throttle valve potentiometer G69
Checking throttle valve positioner V60 fuel cut-off and starting function
Checking cold start and warm-up enrichment
Checking cold idle speed increase
Checking acceleration enrichment
Checking float chamber breather change-over valve N116
Checking dynamic float chamber breather cut-off valve N141
Checking function of throttle valve stage II
Basic setting of throttle valve stage II
Checking vacuum for vacuum unit for stage II
Vacuum connections
Ignition system, glow plug system