volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing power-assisted steering vane pump, vehicles with 128 kW engine > < Installing vane pump

Golf Mk3

Tensioning V-belt
Tensioning V-belt
   
–  Loosen hexagon nut -4- → Note.
–  Loosen hexagon bolts -1- → Note.
–  Loosen clamping bolt -3- of tensioning bolt -8- → Anchor at least one turn → Note.
–  Tension V-belt by turning tensioning bolt -8- → Anchor with torque wrench -V.A.G 1410- and -V.A.G 1410/2--A-.
Specification: Used belts, 4 Nm; new belts, 7 Nm.
  V48-1044
–  Tighten adjustment bolt clamping bolt -3- to 25 Nm.
–  Tighten hexagon bolt -1- to 45 Nm.
–  Tighten hexagon bolt -2- and nut -4- to 25 Nm.
  Note
Nut -4- is only installed in petrol engines.
1)  If not already loosened.
  V48-1044

Removing and installing power-assisted steering vane pump, vehicles with 128 kW engine > < Installing vane pump