volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing coolant temperature sender at radiator outletG83 > < Removing and installing coolant temperature sender

Golf Mk6

Removing and installing coolant temperature senderG62
Removing and installing coolant temperature sender -G62-
Removing
l  Engine cold
–  Briefly open filler cap for coolant expansion tank in order to reduce pressure in cooling system.
–  Remove engine cover/air filter → Chapter.
   
–  Disconnect electrical connector -1- at coolant temperature sender -G62-.
  Note
Place a cloth underneath to catch escaping coolant.
–  Pull off retaining clip and coolant temperature sender -G62-.
Installing
Installation is carried out in the reverse order; note the following:
  Note
t  Renew O-ring.
t  Insert new coolant temperature sender -G62- immediately into connection to avoid loss of coolant.
–  Check coolant level → Chapter.
  A19-10692

Removing and installing coolant temperature sender at radiator outletG83 > < Removing and installing coolant temperature sender