Golf Mk6
Note
|
| 1 - | Cap |
| q | Check using cooling system tester -V.A.G 1274- and adapter for cooling system tester -V.A.G 1274/9-. |
| q | Pressure relief valve must open at between 1.4 and 1.6 bar. |
| 2 - | Connector |
| 3 - | 5 Nm |
| 4 - | Expansion tank |
Note| When renewing expansion tank and during service operations, ensure that 2 silicate cartridges → Electronic parts catalogue are always in expansion tank. The silicate cartridges must not be removed. |
| q | Test cooling system for leaks using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/8-. |
| 5 - | Sealing strip |
| q | Not installed |
| 6 - | O-ring |
| q | Renew if damaged. |
| 7 - | Lower coolant hose |
| q | To connection for thermostat. |
| 8 - | 5 Nm |
| 9 - | 5 Nm |
| 10 - | Radiator fan 2 -V177- |
| q | Removing and installing → Chapter. |
| 11 - | Radiator fan -V7- |
| q | Removing and installing → Chapter. |
| q | With radiator fan control unit -J293-. |
| 12 - | Connector |
| 13 - | Radiator cowl |
| q | Removing and installing → Chapter. |
| 14 - | Radiator |
| q | Removing and installing → Chapter. |
| q | After renewing, renew entire coolant. |
| 15 - | Upper coolant hose |
| q | To connection on cylinder head. |
