volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator > < Assembly overview - radiator, radiator fan

Golf Mk6

Removing and installing cowl together with radiator fanV7 and radiator fan 2V177
Removing and installing cowl together with radiator fan -V7- and radiator fan 2 -V177-
Removing
–  Remove engine cover/air filter → Chapter.
   
–  Unscrew upper securing bolts for radiator cowl -arrows-.
–  Remove noise insulation → General body repairs, exterior; Rep. gr.50.
  A19-0473
–  Disconnect connector -1- and unscrew lower securing bolts for radiator cowl -arrows-.
–  Take out radiator cowl from underneath.
  A19-0473
–  Disconnect connector -1- and expose lines.
–  Unscrew nuts -arrows- and remove fan.
Installing
Install in reverse order. In the process, note the following:
Specified torques → Chapter.
  A19-0475

Removing and installing radiator > < Assembly overview - radiator, radiator fan