Polo Mk4
| Handbrake - assembly overview |
| 1 - | Handbrake lever lining |
| q | Remove by pulling forward |
| q | Uncouple the unlocking latch -arrow- in the lower cable area with a screwdriver. |
| 2 - | Compensation arch |
| 3 - | Adjusting nut |
| q | Adjust the handbrake: |
| q | Vehicles with drum brake → Chapter |
| q | Vehicles with disc brake → Chapter |
| 4 - | Hexagonal nut |
| q | 25 Nm |
| 5 - | Rubber bellows |
| 6 - | Right-hand guide tube |
| 7 - | Left-hand guide tube |
| 8 - | Handbrake lever support |
| 9 - | Handbrake cables |
| q | remove and install (drum brake) → Chapter |
| q | remove and install (disc brake) → Chapter |
| 10 - | Handbrake switch |
| q | remove and install → Chapter |
| 11 - | Handbrake lever |
| q | before removal, remove centre console → General body repairs, interior; Rep. Gr.68 |