volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Receiver Dryer > < ECC Unit Removal|Page 11049
Page 2
background image

A25 Install rubber seal and cover on lead-through at evaporator and heater.

Note:  Several connection variations are used.

A26 Connect coolant hose and water valve to heater inlet (lower) pipe.

Note:  Operation A27 applies only to cars with A/C

A27 Tighten air receiver connections.

A28 Install dashboard.

Note:  Operation A29 applies only to cars with A/C

A29 Fill system with refrigerant.

Receiver Dryer > < ECC Unit Removal|Page 11049