S60 L5-2.4L VIN 64 B5244S6 (2003)
Wipe the oil film off the mating surfaces on the camshaft cover and cylinder head.
Install new O-rings around the spark plug wells at the cylinder head.
Apply liquid gasket 116 1059 on the camshaft cover.
Use roller 951 2767 Roller See: Tools and Equipment/951 2767 Roller.
The surface must be completely covered without any excess.
Caution! Make sure that no liquid gasket gets into the oil channels.
Installing the camshaft covers
Lubricate the camshaft lobes, the camshaft bearing surfaces and the top of the valve lifters.
Install the camshaft cover.
Install press tool 999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool (2x).
Tighten the camshaft cover screws alternately, keeping it parallel to the cylinder head using the press tools.
Install all the screws. Tighten the screws from the middle and outwards.
Remove the press tools.
Install
-
the variable valve timing (VVT) solenoid. Use a new gasket
-
the spark plugs. Tighten. See Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque.
Installing the intake pipe for the coolant pump