volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 57
background image

Assembly

Assembling primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Assembling secondary lock

Press the secondary lock into place.

Connector Sealed, Type 1

Connector sealed type 1

Special tools:

951 2631 Terminal removal tool  See: Tools and Equipment/951 2631 Terminal Removal Tool 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Dismantling

Note! The connector has no secondary lock.

Disassembling primary lock

Use tool: 951 2631 Terminal removal tool  See: Tools and Equipment/951 2631 Terminal Removal Tool  to remove the primary lock. See the graphics.
At the same time pull the cable carefully backwards.

Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Diagrams > Diagram Information and Instructions > Page 1056

< PREV PAGE NEXT PAGE >