Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Brakes and Traction Control > Disc Brake System > Brake Pad > Component Information > Service and Repair > Brake Pads, Front, Replacing > Page 5071

Page 3
background image

Installing wheel

- Make sure that brake discs and rim contact surfaces are clean.
- Grease hub center rim guide with anti-rust agent 116 1038-3.
- Install wheel.
- Tighten bolts hand tight. Then tighten them crosswise to 110 Nm (80 ft lb). If using an airgun, use torque socket 115 8147

Note!

Tightening bolts crosswise to a specific torque setting is important in preventing stresses in the brake disc.

Brakes and Traction Control > Disc Brake System > Brake Pad > Component Information > Service and Repair > Brake Pads, Front, Replacing > Page 5071

[PREV PAGE] [NEXT PAGE]