volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacement Procedure (Driver's)|Page 7126 > < Replacement Procedure (Driver's)|Page 7124
Page 2
background image

NOTE:  Be careful when disconnecting the ignition wire. There is a risk that the ignition wire will break if roughly handled.

CDD4. Removal of screws from SRS airbag

Remove 3 screws M6, 10 mm (0.4 inch), from the bottom of the passenger side airbag module. When installing, torque setting = 10 Nm (7.5
ft-lb).

CDD5. Removal of ventilation and loudspeaker grilles

Remove the ventilation and loudspeaker grilles by pulling them out using a hook or similar tool.

CDD6. Removal of cover panel

Remove 11 screws, Torx 20, from the cover panel.

CAUTION!  When the cover panel with the unreleased passenger side air bag module is removed, position the cover panel with its top side

Replacement Procedure (Driver's)|Page 7126 > < Replacement Procedure (Driver's)|Page 7124