XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
the propeller shaft.
Installation
Note! For tightening torques, see: See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications/Tightening Torque
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair/Flanged Joint, Assembling.
Installing the propeller shaft
Check carefully that the mating surfaces on the propeller shaft and flange are clean.
Align the propeller shaft joints with the flanges. Loosely install the screws in the center member and the center bearing.
Installing the front joint on the drive flange
Use new screws. Tighten. See: See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications/Tightening Torque
Use counterhold: 999 7057 Counterhold See: Tools and Equipment/999 7057 Counterhold.
Installing the rear joint on the drive flange
Note! Only applies to vehicles with propeller shaft universal joints with 6 bolts.
Use new screws. Tighten. See: See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications/Tightening Torque
Use counterhold 999 7057 Counterhold See: Tools and Equipment/999 7057 Counterhold.