Volvo Workshop Manuals
XC90 FWD L6-3.2L VIN 96 B6324S2 (2010)
Transmission and Drivetrain > Differential Assembly > Seals and Gaskets, Differential > System Information > Technical Service Bulletins > Customer Interest for Seals and Gaskets: > Page 3088
Rear axle, drive shafts
Drain the oil from the final drive.
General (applies to all models)
3. Warning! Use protective eyewear.
Clean the final drive using isoproponal PN 1161721 around the mating flange.
Blow clean with compressed air.
- The screws, quantity (qty) 8 or 9, depending on model.
Final drive, cleaning
4. Clean the oil from the flange using isoproponal PN 1161721.
Clean all gasket material from the flange using gasket remover PN 1161847 and abrasive cloth PN 9511024.
Use the abrasive cloth along the flange as the arrows indicate.
Clean the flange using isoproponal PN 1161721.
Ensure that gasket residue does not end up in the final drive.
|[PREV PAGE] [NEXT PAGE]|