Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 2944

Page 1
background image

Wheel Speed Sensor: Service and Repair
Wheel Sensor Rear, Replacing

Wheel sensor rear, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Preparation

Remove:

-

the outer rear seats. See Upholstery seat cushion outer (second row), replacing See: Body and Frame/Seats/Seat Cover/Service and Repair/Rear
Seat, Passenger Seat, Seat/Upholstery Seat Cushion Outer (Second Row), Replacing 

-

the center rear seats. See Upholstery seat cushion center (second row), replacing See: Body and Frame/Seats/Seat Cover/Service and Repair/Rear
Seat, Passenger Seat, Seat/Upholstery Seat Cushion Center (Second Row), Replacing.

Fold the carpet back (1).

Remove:

-

the insulation block (2)

-

the insulation block (3).

Applies only when replacing the sensor on the left-hand side

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 2944

[PREV PAGE] [NEXT PAGE]