Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 2943

Page 6
background image

Finishing

Function testing after replacement

Read off any diagnostic trouble codes (DTCs).
Erase diagnostic trouble codes (DTCs).
Ignition off.
Start the engine. Check that the stop (brake) warning lamp does not light. If the stop (brake) warning lamp lights, the car must not be driven.

Test driving

Test drive the vehicle. See: Test Drive Form (ABS), description See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing
and Inspection/Initial Inspection and Diagnostic Overview/Test Drive Form (ABS), Description.

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 2943

[PREV PAGE] [NEXT PAGE]