Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 2942

Page 5
background image

Install:

-

the cable in the clip and the brackets

-

the sensor in the wheel spindle. Tighten. See: Tightening torque See: Brakes and Traction Control/Specifications/Tightening Torque.

Fitting the wheel

Install the wheels. See: Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Installing the air cleaner (ACL) housing

Install the air cleaner (ACL) housing. Check that the hoses are not trapped under the air cleaner (ACL) housing.

Install:

-

the plastic nut on the wheel arch side

-

the inlet hose using the hose clamp (2)

-

the connector (3)

-

the cable using the new cable tie to the air cleaner (ACL) housing

-

the turbocharger (TC) control valve on the air cleaner (ACL) housing

-

the inlet hose with the 2 screws (1).

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 2942

[PREV PAGE] [NEXT PAGE]