Freelander Service Procedures
BRAKES
70-10
REPAIRS
Lever assembly - handbrake
$% 70.35.08
Remove
1. Remove rear console.
2. Disconnect Lucar from handbrake warning
switch.
3. Remove cable adjusting nut.
4. Remove 2 bolt securing handbrake lever
assembly.
5. Release adjusting rod from equalizer and
remove handbrake lever assembly.
6. Remove spring from adjusting rod.
Refit
1. Fit spring to adjusting rod.
2. Fit handbrake lever assembly, fit bolts and
tighten to 22 Nm (16 lbf.ft).
3. Fit cable adjusting nut.
4. Connect Lucar to handbrake switch.
5. Adjust handbrake.
6. Fit rear console.
