Removal - Refitting (1929 TD) (page 4 of 5)
- Make
- Alfa Romeo
- Model
- 145/146 Factory Service Manual
- Year
- 1994–1999
- Section
- Removal - Refitting (1929 TD)
GearboxRemoval - Refitting (1929 TD) · page 4 of 5
- Slacken the screws and nuts fastening the "crocodile" to the body and lower it just enough to be able to remove the crossmember.
- Lower the car.
- Using tools N° 1.820.239.000, N° 1.820.581.000 and N° 1.820.226.000 support the engine appropriately.
Fasten the chain on the rear side of the engine using the support bracket of the front section of the exhaust pipe.
- Slacken the four nuts and the bolt fastening the rear power unit support to the gearbox.
- Slacken the two fastening screws and remove the flywheel guard.
- Slacken the two screws fastening the rear power unit support to the body and remove it.
Parts & tools for this job For 1994 Alfa Romeo 145/146
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 145/146
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.