16 · Electrical

Starter motor - r+r

Make: Alfa Romeo
Model: 147 Factory Service Manual
Year: 2000–2004
Section: Engine starting › Starter motor - r+r

‹ Prev Ignition switch contacts carrier block - r+r Next › Starter motor - r+r for versions with a/c

Electrical equipmentStarter motor - r+r

Starter motor - r+r

Operation 5520B10 · Starter motor and components

1.9 JTD 8V

Removing

Position the vehicle on the ramp.

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
	Battery	A1B

Proceed with removal - 1016A10 sound-proofing cover - r + r.

Proceed with removal - 7055B54 under-engine guard - r r.

1. Undo the lower starter motor retaining bolt.

1. Undo the nuts (1a) and disconnect the electrical connections (1b) from the stater motor.

	Name	Connector
1b	Starter motor	A20

1. Undo the upper bolts (1a) and remove the starter motor (1b).

Refitting

Refit the starter motor in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value (daNm)
	Bolt	STARTER MOTOR	M8	(Gearbox side) 2.7

Fastening

Component

Value

(daNm)

Bolt

STARTER MOTOR

(Gearbox side) 2.7

Connect the electrical connections to the starter motor and fix them using the nuts.

Proceed with refitting - 7055B54 under-engine guard - r r.

Proceed with refitting - 1016A10 sound-proofing cover - r + r.

Connect the negative (-) battery terminal.

Remove the car from the ramps.

1.9 JTD 16V

Removing

Position the vehicle on the ramp.

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
	Battery	A1B

Proceed with removal - 7055B54 under-engine guard - r r.

Proceed with removal - 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r.

1. Disconnect the electrical connections from the starter motor.

	Name	Connector
1	Starter motor	A20

1. Undo the bolts (1a) and remove the starter motor (1b).