Glow plugs - r+r
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Engine starting › Glow plugs - r+r
Electrical equipmentGlow plugs - r+r
Glow plugs - r+r
Removing
Proceed with removal - 1016A10 sound-proofing cover - r + r.
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | A1B |
1. Disconnect the electrical connections from the heater plugs.
| Name | Connector | |
|---|---|---|
| 1 | Heater plug | A40 |
2. Undo and remove the glow plugs.
Refitting
Place the glow plugs back in their housings and tighten them to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| GLOW PLUGS | M9 | (Cylinder head side) 0.7 ÷ 0.9 |
Connect the electrical connections to the heater plugs.
Connect the negative (-) battery terminal
Proceed with refitting - 1016A10 sound-proofing cover - r + r.
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTGlow plugsSearch: Alfa Romeo 147 2000 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.