Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Maintenance03 Diagnosis – checks04 Engine (1.6 and 2.0 Twin Spark)05 Clutch06 Gearbox (manual and Selespeed)07 Front axle08 Brakes, ABS and traction control09 Steering10 Suspension and wheels11 Heating, air conditioning and washers12 Electrical equipment13 Body14 Body panels and reinforcement15 Wiring diagrams16 Connectors and pin-outs17 Wiring harnesses18 Fault diagnosis19 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2002)18 · Fault diagnosis
18 · Diagnostics

I30 Lights check not working

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2002
Section
Lights › I30 Lights check not working
Fault diagnosisI30 Lights check not working

I30 Lights check not working

With the ignition on, the Body Computer does not detect faults in the operation of the side lights, stop lights or rear fog lamps, despite the fact that they are not working, and the 'Light failure' warning light does not come on

StepTest procedureResultAction
1CHECKING WITH DIAGNOSTIC EQUIPMENT

Connect the Examiner diagnostic equipment to the diagnostic socket.

Check light operation on the instrument panel while in active diagnosis mode

OK

Move onto step 2

Light failure warning light does not come on

End of diagnosis

Light failure warning light comes on

Move onto step 2

2CHECK ON BODY COMPUTER ELECTRICAL CIRCUIT

Verify:

OK

Move onto step 3

Connections not correct

End of diagnosis

Incorrect supply

End of diagnosis

3CHECKING CORRECT OPERATION

Check that the fault is no longer present

OK

Incorrect selection of diagnostic procedure

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.