FLEXIBLE PIPE TO REAR BRAKE CALIPERS

Operation 3330E30 · HYDRAULIC BRAKE SYSTEM PIPES

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE

1. Undo the connector on the rear brake caliper flexible pipe, rigid pipe side.

2. Remove the stop (2a) and release the rear brake caliper flexible pipe (2b) from the mounting bracket.

3. Undo the connector (3a), brake caliper side, and remove the rear brake caliper flexible pipe (3b) after releasing it from the mounting bracket.

Refitting

1. Refit the rear brake caliper flexible pipe (1a) in its seating and connect it to the brake caliper, tightening the connector (1b) to the specified torque.

2. Fix the brake caliper flexible pipe to the mounting bracket using the fastening.

3. Tighten the connector on the rear brake caliper flexible pipe, rigid pipe side, to the specified torque.

Bleed the air from the hydraulic braking system

Op. 3330A14 FRONT OR REAR HYDRAULIC BRAKE SYSTEM - BLEED.

Proceed with refitting

Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE.

Remove the car from the ramps.