Vacuum pump - r+r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Hydraulic braking system › Vacuum pump - r+r
BrakesVacuum pump - r+r
VACUUM PUMP - R+R
Removing
Proceed with removal
- 1016A10 sound-proofing cover - r + r
1. Loosen the band and disconnect the vacuum pipe from the vacuum pump.
2. Undo the bolts (2a) and remove the vacuum unit (2b).
3. Remove the gasket.
Refitting
1. Place the vacuum unit (1a), complete with gasket (1b), back in its housing and secure it tightening the bolts (1c) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1c | Bolt | BRAKE SERVO VACUUM PUMP | M6 | (Cylinder head side 45 55 50 |
2. Connect the vacuum intake pipe to the vacuum unit and tighten the band.
Proceed with refitting
- 1016A10 sound-proofing cover - r + r
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTBrake padsSearch: Alfa Romeo GT 2003 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.