Oil seals on crank shaft
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Crankcase sump and covers › Oil seals on crank shaft
EngineOil seals on crank shaft
OIL SEALS ON CRANK SHAFT
CONSTRUCTION FEATURES
The crankshaft front seal is produced by an oil seal fitted on the front cover (oil pump casing).
The crankshaft rear fluid-tightness is ensured by an oil seal incorporated in the rear cover.
CONSTRUCTION FEATURES
The crankshaft front seal (1) and rear seal (2) are achieved by oil seals fitted directly on the relevant covers.
The seal between rear main journal cap and crankcase is achieved by silicone sealant.
CONSTRUCTION FEATURES
The crankshaft front fluid-tightness is ensured by an oil seal fitted on the front cover (oil pump casing).
The crankshaft rear fluid-tightness is ensured by an oil seal incorporated in the rear cover.
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTOil filterSearch: Alfa Romeo GT 2003 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Alfa Romeo GT engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.