00 Technical data and maintenanceAssembly 10 - v6 engine feed
| 1.820.277.000 | Angle torque dial |
| 1.820.279.000 | Cylinder liner retainer |
| 1.821.006.001 | Rear main bearing extraction lever |
| 1.821.006.002 | Rear main bearing extractor |
| 1.821.150.000 | Crankshaft oil seal taker-in |
| 1.822.135.000 | Tool for removing the fuel pump assembly fastening screw nut from tank |
| 1.822.146.000 | Pulley wrench bracket |
| 1.822.151.000 | Timing pulley wrench |
| 1.825.013.000 | TDC check tool |
| 1.822.159.000 | Tool for removing the fuel level gauge fastening screw nut from tank |
Assembly 10 - v6 engine feed
| 1.820.079.000 | Gap gauge |
| 1.824.011.000 | Flow test pad |
Assembly 18 - Clutch
| 1.820.126.000 | Clutch plate centring tool |
| 1.820.228.000 | Flywheel retainer |
Assembly 21 - T. SPARK 16V engine gearbox-differential
| F3.1.820.017.000 |
Half rings for: - extracting primary shaft 4th speed driven gear
- primary shaft disassembly |
| 1.820.019.000 | Plate for extracting secondary shaft 2nd and 3rd speed driven gears |
| 1.820.022.000 | Half plates for introducing primary shaft bearing internal race |
| 1.820.024.000 | Half ring support plate for extracting secondary shaft 1st speed driven gear |
| 1.820.085.000 | Differential bearing thickness gauge |
| 1.820.146.000 | Rotating stand gearbox support plate |
| 1.820.208.000 | Gearbox removal/refitting bracket |
| 1.820.226.000 | Engine mount |
| 1.820.229.000 | Differential flange extraction flange |
| 1.820.239.000 | Engine gearbox bracket |
| 1.820.581.000 | Engine crossmember |
| 1.820.623.001 | Gearbox removal/refitting bracket |
| 1.821.003.000 | Differential bracket bearing external race extraction ram |
| 1.821.028.000 | Differential bracket bearing external race taker-in |
| 1.821.034.000 | Differential bearing extractor |
| 1.821.047.000 | 1st-3rd-5th speed control rod safety pawl taker-in |
| 1.821.049.000 | Primary shaft rear bearing taker-in half plate |
| 1.821.050.000 | 4th speed driven gear taker-in |
| 1.821.062.000 | Differential bearing taker-in |
| 1.821.092.000 | 1st speed driven gear taker-in |
(continued)
02 Maintenance
