Group 27 - Axle shafts

Make

Alfa Romeo

Model

GTV / Spider GTV and Spider (916) Factory Service Manual

Year

1995–2000

Section

Specific tools › Group 27 - Axle shafts

00 Technical data and maintenanceGroup 27 - Axle shafts

(CONTINUED)

1.820.239.000	Supports for engine gearbox (to be used with 1.820.581.000 and 1.820.226.000)
1.820.581.000	Horizontal engine support crossmember (to be used with 1.820.239.000 and 1.820.226.000)
1.821.034.000	Puller tool for differential bearings
1.821.047.000	Installing tool for 1st
1.821.049.000	Half plate for removing/installing front and rear transmission shaft bearings
1.821.092.000	Installing tool for: - transmission shaft front and rear bearings - secondary shaft rear bearing - secondary shaft 4th speed driven gear
1.821.161.000	Mallet per removing differential flange (to be used with 1.820.229.000)
1.821.169.000	Puller tool for track rod pin
1.821.170.000	Keying tool for installing differential cover oil seals (to be used with 1.821.171.000)
1.821.171.000	Grip (to be used with 1.821.170.000)
	Installing tool for: - secondary shaft front bearing - secondary shaft 1st and 2nd speed engagement hub-sliding sleeve - - secondary shaft 3rd speed driven gear
	Installing tool for differential bearings

Group 27 - Axle shafts

1.820.082.000	Pincer for installing joint protection boot fastening clamps
1.820.084.000	Pincer for installing joint protection boot fastening clamps
1.821.161.000	Mallet
1.821.165.000	Puller tool for C.V. joint

Group 33 - Brakes

1.820.248.000	Tool for adjusting position of front brake caliper piston
1.822.108.000	Tool for moving back rear brake caliper piston

Group 41 - Steering system

1.821.105.000	Puller tool for removing steering wheel from steering column
1.821.169.000	Puller tool for track rod pin

02 Maintenance