02 · Maintenance

Group 10 - Engine Overhaul v6

00 Technical data and maintenanceGroup 10 - Engine Overhaul v6 · page 1 of 2

1.820.277.000	Graduated disk to close angle torques
1.820.286.000	Counter rotating shaft pulley anti-torque
1.820.618.000	Adapter for crankshaft rotation
1.820.619.000	Disk to centre crankshaft rear oil seal
1.820.624.000	Flywheel stop (for use at the bench)
1.820.626.000	Striker weight coupling
1.821.058.000 (A.3.0324)	Lever for valve removal/refitting
1.821.124.000 (A.3.0522)	Support for valve removal/refitting
1.821.176.000 (A.3.0641)	Valve guide extractor
1.821.205.000	Cage for valve removal/refitting
1.821.206.000	Valve guide oil seal inserter
1.821.208.000	Valve guide oil seal extractor
1.821.228.000	Inserter for timing shaft oil seal exhaust side
1.821.247.000	Inserter for crankshaft front oil seal and counter rotation shaft oil seals
1.821.252.000	Inserter for timing shaft oil seal intake side
1.821.254.000	Valve guide inserter
1.822.146.000	Support for pulley wrenches
1.822.147.000	Phase variator wrench
1.822.149.000	Timing belt tensioning wrench
1.822.154.000	Counter rotation shaft bvelt tensioning wrench
1.822.155.000	Wrench for timing pulley intake side
1.822.156.000	Wrench for timing pulley exhaust side
1.825.013.000 (C.6.0183)	Tool to check T.D.C.
1.825.041.000	Templates for timing shaft phasing
1.840.206.000	Striker weight

1.820.011.000 (A.2.0192)	Valve support fixture
1.820.012.000 (A.2.0195)	Cylinder head support fixture stand
1.820.049.000 (A.2.0359)	Nut for valve support fixture

(CONTINUED)

Parts & tools for this job For 1995 Alfa Romeo GTV / Spider

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.