Group 44 - Front suspension
- Make
- Alfa Romeo
- Model
- GTV / Spider GTV and Spider (916) Factory Service Manual
- Year
- 1995–2000
- Section
- Specific tools › Group 44 - Front suspension
00 Technical data and maintenanceGroup 44 - Front suspension
Group 44 - Front suspension
| 1.820.047.002 | Plate for removing inner bearing race from wheel hub |
| 1.820.089.000 | Tool for compressing front suspension spring |
| 1.820.223.000 | Half rings for removing inner bearing race from wheel hub |
| 1.820.238.000 | Plate for compressing front suspension spring |
| 1.820.608.000 | Blocks for compressing front suspension spring |
| 1.820.622.000 | Tool for front hub nut angle tightening |
| 1.821.037.000 | Tool for removing inner bearing race from wheel hub (2959 c.c.) |
| 1.821.045.000 | Tool for removing bearing outer race on wheel upright (1970 c.c.) |
| 1.821.051.000 | Tool for: - removing wheel hub from upright - removing bearing inner race from wheel hub |
| 1.821.099.000 | Tool for removing bearing outer race on wheel upright (2959 c.c.) |
| 1.821.149.000 | Support for removing bearing outer race from wheel upright (1970 c.c.) |
| 1.821.169.000 (A.3.0633) | Tool for disconnecting track rod ball joint from wheel upright |
| 1.821.209.000 | Tool for: - installing bearing in wheel upright - installing hub in wheel upright |
| 1.821.217.000 | Tool for front wheel upright bearing (2959 c.c.) |
| 1.821.220.000 | Support for removing bearing outer race from wheel upright (2959 c.c.) |
| 1.822.117.000 | Wrench for slackening and tightening front shock absorber fastening nut |
| 1.860.978.000 | Tool for removing suspension crossmember |
Group 44 - Rear suspension
| 1.820.625.000 | Tool for removal/refitting rear suspension frame |
Group 50 - Climate control unit
| 1.822.111.000 | Socket wrench for Freon pipe fittings |
| 1.822.112.000 | Claw box wrench for Freon pipe fittings |
| 1.822.113.000 | Square wrench for Freon pipe fittings |
| 1.822.115.000 | Pin wrench for Freon pipe fittings |
| 1.822.132.000 | Ratchet wrench for removal/refitting outside air/recirculation port control motor |
| 1.822.136.000 | Set of inserts for removal/refitting outside air/recirculation port control motor |
| 1.826.004.000 | Emptying and recharging station for R134a |
Parts & tools for this job For 1995 Alfa Romeo GTV / Spider
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Alfa Romeo GTV / Spider 1995 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.