Removal
- Make
- Aston Martin
- Model
- DB9 Factory Workshop Manual
- Year
- Issue 2, 2005
- Section
- Transmission Cooling › Removal
07 TransmissionRemoval
| Repair Operation Time (ROT) | |
|---|---|
| Item | Code |
| Oil Cooler (Manual Transaxle Renew | TBA |
Removal
- Disconnect the coolant pipes.
Some transmission oil will start to drip.
Cap the open ends.
- Remove bolts (x2) securing the oil cooler to the subframe. Withdraw the oil cooler.
Installation
- Install the oil cooler to the subframe.
Torque bolts to 8-10 Nm. - Connect the coolant pipes.
- Run the engine to prime the cooling circuit.
- Check / Top up the transmission oil with the specified transmission oil (Refer to 'Manual Transmission (07.03)', page 7-3-1).
Parts & tools for this job For 2005 Aston Martin DB9
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Aston Martin DB9
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.