STRIPPING REAR BUMPER

Operation 7205E66 · EXTERIOR PARTS

Removing

The operation should be carried out with the bumper removed.

Op. 5505C82 WIRING INCORPORATED IN REAR BUMPER - R.R.

Op. 5540E10 REAR FOG LAMP (ONE), LH OR RH - R+R

Op. 5550D24 REVERSING LIGHT - R+R

Op. 5540A94 (ONE) NUMBER PLATE LIGHT - R.R.

1. If necessary, undo the bolts (1a) connecting the upper part of the bumper (1b) with the lower part (1c).

2. Separate the upper part (1b) from the lower part (1c) of the bumper, releasing the retainers (2a).

Refitting

- Check that the bumper is not damaged.

- If separated, connect the two parts of the bumper attaching the retainers, then tighten the bolts.

Op. 5540A94 (ONE) NUMBER PLATE LIGHT - R.R.

Op. 5550D24 REVERSING LIGHT - R+R

Op. 5540E10 REAR FOG LAMP (ONE), LH OR RH - R+R

Op. 5505C82 WIRING INCORPORATED IN REAR BUMPER - R.R.