Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)22 · Fault diagnosis
22 · Diagnostics

Steering hard / (in one direction only)

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Steering – vehicle behaviour › Steering hard / (in one direction only)
Fault diagnosisSteering hard / (in one direction only)

STEERING HARD / (IN ONE DIRECTION ONLY)

When the steering is operated normally there is a hardening of the steering action to the right or the left

Test results
0PRELIMINARY CHECKSAll OKProblems encounteredOperation
Carry out a test steering fully in various conditions to check the actual onset of the hardening in one direction onlyMove on to Step 1Hardening of the steering when carrying out steering manoeuvres in both directions

Proceed as instructed

See table D011 ENGINE IDLING HIGH

1STEERING LINKS AND ARMS CHECKAll OKProblems encounteredOperation
Check the condition of the steering links and armsEnd of diagnosis

1. Links damaged or worn

2. Arms damaged or worn.

1. Replace the links or ball joints

Op. 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOE-IN/TOE-OUT SEPARATELY

2. Replace the steering box

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.