Gearbox rear cover - r + r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Manual gearbox with differential › Gearbox rear cover - r + r.
‹ Prev Seals for gear input shaft - replace with gearbox removedNext › Gear selection and engagement unit - r.r.
Gearbox and differentialGearbox rear cover - r + r.
GEARBOX REAR COVER - R + R.
Removing
Op. 4450B02 LEFT FRONT WHEEL - R.R
Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.
1. Undo the bolts (1a) and remove the gearbox rear cover (1b).
Refitting
- Thoroughly clean traces of sealant from the mating surfaces between the rear cover and the gearbox casing.
- Apply sealant to the contact surfaces between the rear cover and the gear casing.
- Place the gearbox rear cover back in its housing and secure it using the bolts.
Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.
‹ Prev Seals for gear input shaft - replace with gearbox removedNext › Gear selection and engagement unit - r.r.
Parts & tools for this job For 2007 Fiat Bravo
- PARTClutch kitSearch: Fiat Bravo 2007 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Bravo manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.