Cylinder head(s) – cylinder head
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine › Cylinder head(s) – cylinder head
Manufacturing data and tolerancesCylinder head(s) – cylinder head
CYLINDER HEAD(S) – CYLINDER HEAD
| Measurement | Value | Validity |
|---|---|---|
| Engine cylinder head lower surface flatness (mm) | < 0.1 | |
| Cylinder head lower plane minimum permitted height (mm) | 107 +/- 0.05 | 1.9 JTD 16v |
| Cylinder head height (factory value) (mm) | 77 | 1.4 16v TJet |
| Cylinder head height (factory value) (mm) | 77 +/- 0.2 | 1.4 16v |
| Cylinder head nominal height (mm) | 140.85 ÷ 141.15 | 1.9 JTD 8v |
| Cylinder head nominal height (mm) | 107 +/- 0.05 | 1.9 JTD 16v |
| Combustion chamber volume (cc) | 14 | 1.4 16v |
| Combustion chamber volume (cc) | 14.30 | 1.4 16v TJet |
| Cylinder head gasket size with maximum piston projection (mm) | projection -0.020 ÷ +0.100 thickness (no opening) 0.770 ÷ 0.870 | 1.9 JTD 8v |
| Cylinder head gasket size with maximum piston projection (mm) | projection 0.101 ÷ 0.200 thickness (one opening) +0.870 ÷ +0.970 | 1.9 JTD 8v |
| Cylinder head gasket size with maximum piston projection (mm) | projection 0.201 ÷ 0.295 thickness (two openings) +0.970 ÷ +1.070 | 1.9 JTD 8v |
| Cylinder head gasket size with maximum piston projection (mm) | projection -0.020 ÷ +0.100 thickness (no opening) 0.82 +/- 0.05 | 1.9 JTD 16v |
| Cylinder head gasket size with maximum piston projection (mm) | projection +0.101 ÷ +0.200 thickness (one opening) 0.92 +/- 0.05 | 1.9 JTD 16v |
| Cylinder head gasket size with maximum piston projection (mm) | projection +0.201 +/- +0.295 thickness (two openings) 1.02 +/- 0.05 | 1.9 JTD 16v |
Parts & tools for this job For 2007 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.