Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)02 · Specifications
02 · General

Lubricants

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Products › Lubricants
SpecificationsLubricants

LUBRICANTS

1.4 16v1.4 16v T-Jet1.9 Multijet 8v1.9 Multijet 16v
Engine oil (*)

SELENIA K P.E.

SAE 5W-40 - FIAT 9.55535-S2

SELENIA WR

SAE 5W-40 - FIAT 9.55535-N2

Gearbox/differential fluid

TUTELA CAR TECHNYX

SAE 75W-85 - API GL4 PLUS - FIAT 9.55550

TUTELA CAR MATRIX - SAE 75W-85 - API GL-4TUTELA CAR TECHNYX - SAE 75W-85 - API GL4 PLUS - FIAT 9.5555
Air conditioning compressor fluidND 8

(*) For the correct operation of Multijet versions with DPF, only use the original type of lubricant.

In emergencies, where the original product is not available, only top up with a maximum of 0.5 litres.

If SAE 5W-40 non original products are used, lubricants with minimum ACEA A3 standards for petrol engines are acceptable, ACEA B4 for diesel engines; in this case the optimum engine performance is guaranteed.

The use of products with lower specifications than ACEA A3 and ACEA B4 could cause damage to the engine not covered by the warranty.

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.