Manual gearbox and differential
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Gearbox › Manual gearbox and differential
Tightening torquesManual gearbox and differential
MANUAL GEARBOX AND DIFFERENTIAL
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox fluid drain plug | Plug | M16 | 1.6 ÷ 2.0 | 1.4 16v |
| Gearbox fluid drain plug | Plug | M18 | 1.8 2.2 | 1.9 JTD |
| Gearbox fluid drain plug | Plug | M18 | 1.7 | 1.4 16v TJet |
| Gearbox fluid filler plug | Plug | M22 | 2.3 ÷ 2.8 | 1.4 16v |
| Gearbox fluid filler plug | Plug | M18 | 2.4 ÷ 2.6 | 1.4 16v TJet |
| Manual gearbox to engine - crankcase side | Bolt | M12 | 4.8 ÷ 7.2 | |
| Manual gearbox to engine - crankcase side | Nut | M12 | 4.8 ÷ 7.2 | |
| Manual gearbox to engine - crankcase side | Nut | M12 | 4.8 ÷ 7.2 | 1.9 JTD |
| Manual gearbox to oil sump | Bolt | M10 | 3.6 ÷ 4.4 | |
| Manual gearbox gear engagement cover | Bolt | M8 | 1.8 ÷ 2.2 | 1.4 16v |
| Manual gearbox gear engagement cover | Bolt | M8 | 2.2 ÷ 2.8 | 1.9 JTD |
| Rear cover | Bolt | M6 | 0.5 | 1.4 16v |
| Gear selection/engagement lever | Nut | M8 | 1.8 ÷ 2.2 | 1.4 16v |
| Left flange on differential | Bolt | M8 | 1.8 ÷ 2.2 | 1.4 16v |
| 5th speed control rod | Bolt | M8 | 2.1 ÷ 2.6 | 1.9 JTD |
| 5th speed control fork | Bolt | M8 | 2.1 ÷ 2.6 | 1.9 JTD |
| Manual gearbox/differential components casing | Bolt | M9 | 2.9 ÷ 3.6 | 1.9 JTD |
| Gearbox casing | Bolt | M8 | 1.8 ÷ 2.2 | 1.4 16v |
| Manual gearbox/differential reverse gear idler | Bolt | M10 | 4.3 ÷ 5.3 | 1.9 JTD 8v |
| Manual gearbox reverse gear idler | Bolt | M8 | 2.3 ÷ 2.8 | 1.4 16v |
| Manual gearbox casing differential support | Bolt | M10 | 4.3 ÷ 5.3 | 1.9 JTD |
| Manual gearbox casing differential support | Bolt | M8 | 2.1 ÷ 2.6 | 1.9 JTD |
| Manual gearbox casing differential support | Bolt | M8 | 2.0 | 1.4 16v |
| Manual gearbox casing differential support | Bolt | M10 | 3.5 | 1.4 16v |
| Flanges on differential | Bolt | M8 | 2.1 ÷ 2.6 | 1.9 JTD |
| Left flange on differential | Bolt | M8 | 2.0 | 1.4 16v |
| Reverse shaft | Bolt | M10 | 4.3 ÷ 5.3 | 1.9 JTD |
| Manual gearbox-differential ring gear | Bolt | M10 | 7.7 ÷ 9.5 | 1.9 JTD |
| 5th speed engagement fork control pawl | Bolt | M6 | 1.1 ÷ 1.3 | 1.4 16v |
| Main and layshaft rear bearings retaining plate | Bolt | M8 | 1.8 ÷ 2.2 | 1.4 16v |
| Support with fork lever for reverse gear engagement | Bolt | M8 | 1.4 ÷ 1.6 | 1.4 16v |
| Main shaft gears | Nut | M16 | 12.6 | 1.4 16v |
| Layshaft gears | Bolt (left hand thread) | M12 | 10.0 ÷ 11.0 | 1.4 16v |
| Main shaft rear bearing | Bolt | M8 x 1.5 | 5.0 ÷ 7.0 | 1.4 16v TJet |
| Gearbox casing | Bolt | M8 | 2.2 | 1.4 16v TJet |
| Gear selection and engagement assembly | Bolt | M8 | 2.0 | 1.4 16v TJet |
| Coaxial actuator | Bolt | M6 | 0.6 | 1.4 16v TJet |
| Inner differential casing mounting | Bolt | M12 | 11.0 | 1.4 16v TJet |
| Inner differential casing mounting | Bolt | M8 | 2.2 | 1.4 16v TJet |
| Left flange on differential | Bolt | M8 | 2.0 + 45° | 1.4 16v TJet |
| Manual gearbox-differential ring gear | Bolt | M10 x 1.25 | 6.0 + 90° | 1.4 16v TJet |
Parts & tools for this job For 2007 Fiat Bravo
- PARTClutch kitSearch: Fiat Bravo 2007 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Bravo manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.