Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting distribution manifold

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (98 range, 1910 JTD) › Removing-refitting distribution manifold
10 EngineRemoving-refitting distribution manifold · page 1 of 4
Diagram showing the electrical connector for the flow meter being disconnected

REMOVING-REFITTING DISTRIBUTION MANIFOLD

  • Disable the alarm (if fitted) via the switch under the junction unit cover.
  • Disconnect the terminals and remove the battery.
  1. Disconnect the electrical connection for the flow meter.
Diagram showing the first section of pipe between the air filter casing and turbocharger, with icons indicating loosening bands
  1. Loosen the bands and remove the first section of the pipe between the air filter casing and the turbocharger.
Diagram showing the second section of pipe between the air filter casing and turbocharger, indicated by an arrow
  1. Loosen the bands and remove the second section of the pipe between the air filter casing and the turbocharger.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.