Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing - refitting pressure pump

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (98 range, 1910 JTD) › Removing - refitting pressure pump
10 EngineRemoving - refitting pressure pump · page 1 of 4
Diagram showing the upper engine protective cover area
Diagram showing bolts on the bracket assembly and reaction rod

REMOVING - REFITTING PRESSURE PUMP

Diagram showing the moving tensioner and auxiliary drive belt

Position the vehicle on a lift.

  • Disable the alarm (if fitted) via the switch under the junction unit cover and disconnect the negative battery lead.
  1. Remove the upper engine protective cover.
  2. Remove the bracket assembly on the engine and reaction rod undoing the bolts shown in the diagram.
  • Remove the right front wheel and the wheel arch liner.
  1. Act on the moving tensioner to loosen the tension for the auxiliary drive belt and remove the belt.
  2. Undo the bolts shown in the diagram and remove the flywheel protection.
Diagram showing the bolts for the flywheel protection

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.